Your next plastic part starts with a good conversation. Contact YJX

Plastic mold manufacturing

Develop a production mold around the way your part needs to fill, cool, release and assemble. YJX combines mold design, precision machining, fitting and in-house trials in Shenzhen.

Assembled YJX injection mold with guide pins and tooling plates

Review the part before cutting steel

Start with the part model and the dimensions, surfaces and interfaces that drive approval. YJX uses mold-flow analysis to study filling, feeding, cooling and shrinkage. We share mold layout drawings for customer review before moving into the build.

  • Gate and parting line

    Mark visible surfaces and any areas where gate marks, ejector marks or parting lines need to be controlled.

  • Release and assembly

    Flag undercuts, shut-offs, snap fits and mating features so the tool layout can reflect how the part will be ejected and used.

From machining to assembly

Our toolroom uses CNC, EDM and wire EDM alongside milling, bench fitting and mold assembly. The design review establishes which tool features, inserts and components the build requires.

  • Tool configuration

    Confirm the resin, expected output, cavity count, tool steel requirements and any specified hot-runner or standard components.

  • Production location

    If the mold will run at another plant, share its press interface, utilities and local component preferences before the layout is approved.

Trial, measure and agree release

YJX runs mold trials in-house. Set the measurement and appearance criteria before the trial so both teams can evaluate the same sample conditions and agree which issues need another review.

  • Sample requirements

    Identify inspection dimensions, function tests, material and the number of samples needed.

  • Tool handover

    Agree the drawings, maintenance information and packing requirements the receiving plant needs.

Request a tooling quote

Send a 3D model, a dimensioned drawing with revision and any photos or samples that clarify the intended finish. Include resin grade if selected, annual and lifetime volume, the destination for the mold and your sample milestone.