Your next plastic part starts with a good conversation. Contact YJX

Consumer electronics housings

Develop molded housings for wearables, charging products, tablets, and security equipment with the internal components and user interfaces in view.

Interior of a molded electronics enclosure

Products and housing features

YJX’s product examples include wearable devices, wireless charging and power products, and housings for tablets and security equipment. An enclosure brief is easiest to review when it shows both the outside surfaces and the components that must fit inside.

  • Wearables

    Show the fastening and strap interfaces, the faces that contact skin, and how buttons or openings align across the assembly.

  • Charging and power products

    Specify the alignment of charging surfaces and indicators, cable and connector openings, and any heat-management features assigned to the housing.

  • Tablet and security housings

    Identify display or lens openings, PCB mounting features, screw bosses, and the edges that have to align with adjoining parts.

Design details to review before tooling

  • Internal clearance

    Supply an assembly model or the geometry of the PCB, connectors, fasteners, and other parts that constrain the housing.

  • Surface and manufacturing marks

    Define visible zones and target textures. Agree where parting lines, gates, and ejection marks can sit.

  • Fit and feel

    Give usable targets for seam alignment, button travel, snap engagement, and any dimensional checks that depend on the assembled product.

  • Ribs and bosses behind visible faces

    Highlight ribs and screw bosses directly behind visible surfaces. Review wall thickness changes around their bases for possible sink marks and gloss variation. Add those areas to the sample appearance check.

Industry reference BASF: Injection-molding problems in engineering thermoplastics

Materials, finish, and sample evaluation

Provide separate material and color requirements for each housing piece. If a design combines hard and soft materials or multiple colors, identify which surfaces and interfaces are intended for two-shot molding or overmolding so YJX can review the approach with you.

For sample approval, list the assembly, cosmetic, and functional checks you need, together with the mating parts, references, or fixtures used for those checks.